Product ID:FM 73 ADHESIVE FILM
MSDS Date:01/13/1994
FSC:8040
NIIN:01-325-3009
MSDS Number: BXKJM

AMERICAN CYANAMID CO CYTEC INDUSTRIES DIV

5 GARRET MOUNTAIN PLZ
WEST PATERSON, NJ 07424-5000
US

Emergency Phone: 201-357-3100/201-652-6013

Info Phone: 201-357-3100/201-652-6013

Cage: 83289

AMERICAN CYANAMID CO CYTEC INDUSTRIES DIV CHEMICAL LIGHT

LITTLE FALLS, NJ 07424 US

Telephone: 201-831-2000/201-357-3100

Cage: 83289

TITANIUM DIOXIDE, TITANIUM OXIDE (SUSPECTED ANIMAL

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-0.8%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

METHYL ETHYL KETONE, 2-BUTANONE *97-2*

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 1-5%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 0-10%

ACGIH TLV: 2 MG/CUM RESP IC

MODIFIED POLY(AROMATIC GLYCIDYL ETHER)*

Fraction By Weight: 60-100%

FIBERGLASS, FIBROUS (FIBER) GLASS, GLASS FIBERS *97-2*

RTECS: LK3651000

Fraction By Weight: 0-10%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

LD50 LC50 Mixture:ORAL LD50(RAT): 2700 MG/KG 2-BUTANONE
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: PRIMARY IRRITATION MAY PRODUCE
PROLONGED/REPEATED CONTACT W/EPOXY RESINS. INHALATION: OVEREXPOSURE
TO VAPOR DURING HEAT MAY CAUSE IRRITATION/INJURY OF THE RESPIRATORY
TRACT. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:ALLERGIC SKIN REACTIONS/PRIMARY
SKIN IRRITATION.

First Aid:SKIN: IMMEDIATELY WASH AREAS W/SOAP & PLENTY OF WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:WATER, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SCBA & FULL PROTECTIVE CLOTHING.

Spill Release Procedures:WEAR NIOSH APPROVED, POSITIVE PRESSURE, SELF
CONTAINED RESPIRATOR/NIOSH APPROVED RESPIRATOR SUITABLE FOR LEVEL
EXPOSURE. WEAR PROTECTIVE CLOTHING/EQUIPMENT. SWEEP UP & PLACE IN A
WASTE DISPOSAL CONTAI NER. FLUSH AREA W/WATER.

Handling and Storage Precautions:AVOID PROLONGED/REPEATED CONTACT
W/SKIN. STORE AT/< 0F. FOOD, BEVERAGES & TOBACCO PRODUCTS SHOULDN'T
BE CARRIED, STORED/CONSUMED WHEN IN USE.
Other Precautions:AVOID SKIN CONTACT. CUTTING, GRINDING/SANDING OF
PARTS FABRICATED AFTER CURING OF THIS MATERIAL MAY CREATE
RESPIRABLE DUST PARTICLES.

Respiratory Protection:WHERE EXPOSURES EXCEED THE PEL, USE RESPIRATOR
APPROVED BY NIOSH. A FULL FACEPIECE RESPIRATOR WILL PROVIDE EYE &
FACE PROTECTION.
Ventilation:GOOD ENCLOSURE & LOCAL EXHAUST TO CONTROL EXPOSURE WHEN
SPRAYING/CURING AT ELEVATED TEMPS.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES/FACESHIELD
Other Protective Equipment:IMPERVIOUS APRON, WORKPANTS, LONG SLEEVE
WORK SHIRT/DISPOSABLE COVERALLS, BARRIER CREAMS, EYEWASH STATION,
SAFETY SHOWER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DESTROY/THOROUGHLY CLEAN SHOES BEFORE REUSE.
Supplemental Safety and Health
BEFORE EATING, DRINKING/SMOKING, WASH FACE & HANDS W/SOAP & WATER.

Appearance and Odor:YELLOW TACKY FILM; ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:TEMPS <0F, ELEVATED TEMPS.
Hazardous Decomposition Products:CO, CO2, HYDROGEN CYANIDE &/OXIDES OF
NITROGEN.
Conditions to Avoid Polymerization:ROOM TEMP, TEMP <0F.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.